Промышленный коммутатор RGS-7244GP/RGS-7244GP-E Gigabit Ethernet

RGS-7244GP

RGS-7244GP-E

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

Switching latency: 7 μs
Switching bandwidth: 56Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Up to 9K Bytes

Device Binding security feature
Enable/disable ports, MAC based port security
Port-based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
RADIUS centralized password management
SNMPv3 encrypted authentication and access security

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Client/Server

RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1

Power Indicator(PWR)

Green : Power indicator for AC

Green : Power indicator for AC and DC

Power-1 Indicator (PW1)

N/A

Green : Indicates Power-1 input

Power-2 Indicator (PW2)

N/A

Green : Indicates Power-2 input

Power-3 Indicator (PW3)

N/A

Green : Indicates Power-3 input

System Ready Indicator(STA)

Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware.

R.M. Indicator(R.M.)

Green : Indicates that the system is operating in O-Ring Master mode.

O-Ring Indicator(Ring)

Green : Indicates that the system is operating in O-Ring mode Blinking indicates that the Ring is broken.

Fault Indicator (Fault)

N/A

Amber : Indicates unexpected event occurred

Sysem Runnig Indicator (RUN)

Green : System is operating continuously

Supervisor login indicator (RMT)

Green : System is accessed remotely

Reset to Default running indicator (DEF)

Green : System resets to default configuration

Ping command to the switch indicator (Ping)

Green : System is processing “PING” request

10/100/1000Base-T(X) RJ45 port indicator

Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator.Right Amber for full-duplex indicator.

1000Base-X SFP Fiber port indicator

Green for port Link/Act.

Fault Contact

Relay

N/A

Relay output to carry capacity of 1A at 24VDC

Redundant Input Power

100~240VAC with power cord

100~240VAC with power cord, dual 36 ~ 72VDC power inputs at 6-pin terminal block

Power Consumption (Typ.)

36 Watts

36 Watts

Overload Current Protection

Present

19-inch rack-mountable

443.7(W) x 200(D) x 44mm(H) mm

431 (W) x 342 (D) x 44 (H) mm

2700 g

4250g

FCC Part 15, CISPR (EN55022) class A

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )

84,479